[Public-list] Tiller Head Fitting

[James Schueler]

Thank you Stephen.

James

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of sousa, stephen
(ENG)
Sent: Tuesday, January 11, 2005 7:36 PM
To: 'Alberg 30 Public List -- open to all'
Subject: RE: [Public-list] Tiller Head Fitting

Jim,

If you cannot have your strap welded and need to order from Edson, call
direct they are great people. I would also ask if they have any caps
without
keyways if not required, they added the key since my purchase. Either
one
will work as long as the centering pin is placed in the cap. 

As George noted on the web site Buck also carries a cap and strap, the
distributor in the Northeast is Jamestown Dist in Bristol, R.I. not sure
for
other areas but they will ship anywhere.

Stephen    

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of George Dinwiddie
Sent: Tuesday, January 11, 2005 5:32 PM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-list] Tiller Head Fitting

You can see the Edson tiller head on 
http://www.alberg30.org/maintenance/Steering/TillerHead.html

sousa, stephen (ENG) wrote:
> Jim,
> 
> If you cannot have the current one bronze welded, Edson Marine sells
the
> tiller cap and strap as a unit. I had to drill and tap the hole that
accepts
> the centering pin for the cap. But the unit does fit our boats with a
little
> rework.
> 
> Stephen
> #114 
> 
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of James Schueler
> Sent: Tuesday, January 11, 2005 2:08 PM
> To: public-list at alberg30.org
> Subject: [Public-list] Tiller Head Fitting
> 
> Hello all.
>  
> The bracket that attaches the tiller to the rudder post on my Alberg
has
> a crack in it. Should I have it welded, if that can be done, or is it
> possible to have another one fabricated? Or is there another solution
> that I haven't thought of?

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                                             'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1105548983.0