[Public-list] Rudders / epoxy - polyester bonding/ non-skid

[Roger L Kingsland]

Thanks Don,

I discovered the Eopxyworks site can be accessed from the West System home
page (http://www.westsystem.com/); click on Epoxyworks at bottom left or go
directly to the issue here http://www.epoxyworks.com/.

Roger 148

----- Original Message ----- 
From: "Don Campbell" <dk.campbell at sympatico.ca>
To: "public list, Alberg" <public-list at alberg30.org>
Sent: Tuesday, January 25, 2005 10:48 AM
Subject: [Public-list] Rudders / epoxy - polyester bonding/ non-skid


> For any of you wanting extra information on epoxy - polyester bonding
> and an example of making a rudder from scratch ( after repair was not
> practical), get a copy of Gougeon's Epoxyworks,  number 22,  Winter
> 2004. Epoxyworks is free to anyone in Canada and the US who takes the
> time to ask for a subscription. Both the rudder project and a technical
> articles are available in this issue. The technical articles detail the
> breaking strengths of both repairs to polyester substrates using epoxy
> vs polyester and adhesion to gelcoats of epoxy mixtures. The main
> conclusion was to maximise the bonding surface with long scarfe joints -
> minimum 12:1.
>     Also in this issue is an article on obtaining flexible moulds for
> repairing existing non-skid patterns from a maker of non-skid moulds.
> E-mail epoxyworks at gougeon.com
> or snailmail
> Epoxyworks
> P.O. Box 908
> Bay City MI, 48707-9808
>
> Don #528
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>
>



 1106674937.0