[Public-list] A-30 Tiller head

[Dave Terrell]

that had been done on my boat and it sounds like a good idea to continue
that practice. the "ears" on mine are quite worn. It may be the case
that with the new parts from Edson, all will be tight again.Thanks.

>>> gdinwiddie at alberg30.org 1/31/2005 6:33:37 AM >>>
Dan Sternglass wrote:
> The attachment is rock solid now... The weak pint is there the forked

> end casting onthe wood tiller attaches to the tiller head. I have
this 
> shimmes with several thin stainless washers, which has helped, but
it's 
> beginning to develop some play at that point again.

I suggest putting a bushing between those "ears" on the tiller head. 
It 
seems to me that, instead of the casting on the tiller bending outward,

these bend inward.

-- 
 
----------------------------------------------------------------------
   When I remember bygone days                         George
Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org

   So many I loved were not yet dead,           http://www.Alberg30.org

   So many I love were not yet born.
                                             'The Middle' by Ogden
Nash
 
----------------------------------------------------------------------



_______________________________________________
Public-list mailing list
Public-list at alberg30.org 
http://alberg30.org/mailman/listinfo/public-list 


 1107182277.0