[Public-list] 5200 between planks

[Mike Lehman]

Gord,

You ever notice how the minute you open a tube of 5200, it gets everywhere?

Mike Lehman
 ><((((º>¸.·´¯`·...¸><((((º>


----- Original Message ----- 
From: "Gordon Laco" <mainstay at csolve.net>
To: "Alberg 30 Public List -- open to all" <public-list at alberg30.org>
Sent: Wednesday, January 26, 2005 5:13 PM
Subject: Re: [Public-list] 5200 between planks


> Hi there -
>
> Have I mentioned that I used to have a wooden boat (that I claim to miss)?
> I think the best thing about having 'had' a wooden boat is that it allows
> one to get up on a stump about 'how I used to do it' without any risk
> whatsoever that you will be caught and embarrassed cutting 
> corners...because
> of course one is not 'doing' it anymore.
>
> So
>
> I used to use Sikaflex between planks in situations like you are 
> describing
> because while it seemed to adhere as well as 5200, it was possible
> dis-assemble things afterwards if you ever wanted to.   Tools seemed 
> easier
> to clean too.
>
> A good compound like either 5200 or Sikaflex is better than gluing because
> it will allow the inevitable movement to occur without cracks or releases
> developing.
>
> There is my speech for the time being.
>
> Gord #426 Surprise
>
>
>
>
>
> > Albergers,
> >
> > I am replacing the Plexiglas tops of the lazarette and forward hatches 
> > with
> > teak boards about 4" wide.  I had thought of separating them about 1/16" 
> > and
> > filling the gaps with 5200 hoping this would be more water tight than 
> > gluing
> > the boards together and would look a little more shippy.  Might this 
> > work?  Am
> > I missing anything?
> >
> > Thanks,
> >
> > Roger 148
> > _______________________________________________
> > Public-list mailing list
> > Public-list at alberg30.org
> > http://alberg30.org/mailman/listinfo/public-list
>
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
> 

 1107220723.0