[Public-List] Mast Step Corroded to Mast Foot

[George Dinwiddie]

David,

On 7/5/12 9:40 AM, Meinhold, Michael J. wrote:
> David -
>     If you were able to remove the through-bolt that secures the step to
> the mast,  and apply a penetrant, I expect a good rap from a hammer
> would get it started.

If that doesn't work, try heat. I used a propane torch, both to heat the 
step to get the bolt free, and to head the end of the mast to get the 
step free.

Use a block of wood to spread the load when tapping with the hammer. 
That will reduce the possibility of breaking the step.

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------






 1341503831.0