[Public-List] shrinkage

[Mike Lehman]

When I removed the rudder shoe from Alberg #135, I cut off the shoe and keel 
section with a sawzall instead of trying to remove the screws since I was 
pressed for time. So I have the keel section to match new shoes for a fit. 
BTW, I also cutoff the whole bow section in order to preserve the stem head 
fitting which I still have. The boat was headed for the dumpster so it did 
not present a problem.

Mike Lehman

><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
-----Original Message----- 
From: gordon white
Sent: Tuesday, July 17, 2012 1:20 PM
To: public-list at lists.alberg30.org
Subject: Re: [Public-List] shrinkage

   How hard would it be with the shoe to build up the bottom and side a
small amount with, say, masking tape? While it is not a large amount,
next time one of the new shoes gets used as a pattern it gets smaller
still. (My foundry class was 61 years ago and we used green sand-)

  - Gordon White
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


 1342548552.0