[Public-List] Mast Sheave Washers

[John Mcauliffe]

Mine's a composite sheave also. 
Hull #170 - john

Sent from my iPhone

On Jul 27, 2012, at 12:39 PM, crufone at comcast.net wrote:

> 
> 
> John, 
> 
> My mast is down and I could easily take the sheave out to see where the washers are placed. My mast has the composite sheave, toughenol? material. 
> 
> Michael #133 
> 
> 
> 
> ----- Original Message -----
> 
> 
> From: "John Mcauliffe" <jmcsales at gmail.com> 
> To: "Alberg Club" <public-list at lists.alberg30.org> 
> Sent: Thursday, July 26, 2012 9:23:49 PM 
> Subject: [Public-List] Mast Sheave Washers 
> 
> Have a question on the placement of the 2 Brass Washers - do they go between the sheave and plates? 
> When I took it apart they were siliconed to the outer sides of the plates. Just didn't seem right. Any advice? 
> 
> Sent from my iPhone 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1343416650.0