[Public-List] Hull Numbers
Mike Lehman
sail_505 at hotmail.com
Sat Jul 28 04:57:56 PDT 2012
30 (length) 69 (year) 382 (hull number)
For a description on the hull numbers go to...
http://alberg30.org/boat/numbers.html
For a history of an individual boat go to...
http://alberg30.org/boat/A30BoatHistory.xls
Mike Lehman
><((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
-----Original Message-----
From: Jeremy Brown
Sent: Saturday, July 28, 2012 1:07 AM
To: Alberg 30 Public List -- open to all
Subject: Re: [Public-List] Hello fromVancouver. (Somewhat)proud newowner of
Antares 1967 A30.
Hmm. My understanding was the reverse, that the middle two were year,
didn't think they still made them by 84?
Before I forget, Re: chain plates, mine appear already upgraded, with
stainless backing plates on opposite side etc. One owner really loved her,
a later one sadly abused her quite badly.
Gordon Laco <mainstay at csolve.net> wrote:
Hi Jeremy
That number indicates you've got an Alberg 30, hull number 693, built in '82
Gord #426 Surprise. (3042670)
On 2012-07-28, at 5:26 AM, Jeremy Brown <j_l_brown at shaw.ca> wrote:
> Should I still remove tabbing since it is unbroken? I have pictures of my
> mast step and the sticker on it which is all I could find for identifying
> marks, blue water spars out of north Vancouver. Hull plate says 3069382,
> so I suppose I'm hull 382, anyone know any history on it?
>
>
> Thanks
>
> Jeremy
>
> Mike Lehman <sail_505 at hotmail.com> wrote:
>
> Jeremy
>
> You are welcome. I look forward to getting progress reports. Mike
> Meinhold,
> owner of #272, commented that you should not loosen the rigging too much
> at
> a time, only enough to put slack in the rig, then jack up the beam until
> the
> rigging is tight, then loosen the rigging some more, etc. He learned this
> the hard way earlier this year.
>
> I would not worry about deforming the deck...just take it slow.
>
>
>
> Mike Lehman
>
>> <((((º>`·.¸¸.·´¯`·.¸><((((º>`·.¸¸.·´¯`·.¸><((((º>
> -----Original Message-----
> From: Jeremy Brown
> Sent: Friday, July 27, 2012 11:43 AM
> To: Alberg 30 Public List -- open to all
> Subject: Re: [Public-List] Hello from Vancouver. (Somewhat)proud newowner
> of
> Antares 1967 A30.
>
> Thank you so much:) that's going to be so valuable when it comes time to
> do
> it.
> That's exactly my suspicion with the screws.
>
> My understanding of the depression was exactly that, but the tabbing on
> the
> back is totally unbroken, and the deck has no depression. A different
> surveyor and two experienced boat people looked at it. They were puzzled
> by
> the obvious depression in the underside as the deck looks perfect on top.
> One said that the way the fiberglass tape goes around the trim, and the
> other edges make it appear that the deck was cut out and returned inside
> only.
> I'm worried about distorting the outside deck when I move it back into
> place.
>
>
>
>
> Mike Lehman <sail_505 at hotmail.com> wrote:
>
> Jeremy
>
> The long screws through the bottom provide no support at all. Once they
> are
> removed you may find that the delamination is more pronounced, if the
> screws
> are holding the layers together.
>
> An understanding of how the beam was originally constructed and why it
> failed is helpful to understand how it can be repaired.
>
> 1. Whitby Boat works used the wrong kind of glue to laminate the beam.
> Maybe
> it was the only kind available at the time the boats were manufactured.
> The
> glue failed and the laminations s
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
1343476676.0
More information about the Public-List
mailing list