[alberg30] Re: ScotchBrite

[Guy Lalonde]

From: "Guy Lalonde" <guy.lalonde at sympatico.ca>

Hi Lee,

thx for the info. I don't know of any reason NOT to use
ScotchBrite. I was inquiring about it because I was
not familiar with the ScotchBrite product at all. I will give
it a try when I re-finish the cabin sole.

Cheers my friend,
Guy            Cyrena #466
guy.lalonde at sympatico.ca

-----Original Message-----
From: FINNUS505 at aol.com <FINNUS505 at aol.com>
To: alberg30 at onelist.com <alberg30 at onelist.com>
Date: Thursday, December 03, 1998 3:33 PM
Subject: [alberg30] ScotchBrite


>From: FINNUS505 at aol.com
>
>Hi Guy,
>
>ScotchBrite is a 3M product that looks like an abrasive sponge. I also used
to
>use 220 paper between coats of varnish, but a proffesional varnisher said
that
>the ScotchBrite gives the new coat just as much 'tooth' to hang on to,
without
>removing as much of the previous coat of varnish, and you make less dust. I
>was just curious if you know a reason NOT to use ScotchBrite.
>Thx,
>LeeTrachtenberg
>Stargazer #255
>
>
>
>
>
>------------------------------------------------------------------------
>To unsubscribe from this mailing list, or to change your subscription
>to digest, go to the ONElist web site, at http://www.onelist.com and
>select the User Center link from the menu bar on the left.
>


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.