[alberg30] Re: plans for an anchor platform/bowsprit

[Sutherland]

From: tomsu at uky.campus.mci.net (Sutherland)

George..........I would be happy to write it up but first let me send you a
drawing with dementions and maybe a picture or two and then let me know if
you believe it warrants the write up. I personally like it , even thought
it might be factory till I took a closer look when I removed it to
revarnish.

Tom Sutherland
Lexington Ky.
A 30 #412


>Tom, maybe you'd want to write up your design for the Mainsheet.  Bob
>Marshall's design was basically two 2x4s (or maybe one 2x4 and one
>2x6, I don't recall) that were notched out for the forestay and for
>mounting a roller.  This was then bolted onto both sides of the stem
>fitting.  Bob's design was configured for the older boats, but I
>know that people have created similar ones for the newer boats.
>
>I bought a roller 8 years ago, but that project hasn't reached the top
>of the list, yet. ;-)
>
> - George
>
>--
> ----------------------------------------------------------------------
>  George Dinwiddie                                  gdinwiddie at min.net
>  The gods do not deduct from man's allotted span those hours spent in
>  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
> ----------------------------------------------------------------------
>
>
>------------------------------------------------------------------------
>To unsubscribe from this mailing list, or to change your subscription
>to digest, go to the ONElist web site, at http://www.onelist.com and
>select the User Center link from the menu bar on the left.



------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 898090847.0