[alberg30] Re: Tiller play (was New Forhatch)

[Daniel Sternglass]

From: Daniel Sternglass <dans at stmktg.com>

George Dinwiddie wrote:
> 
> From: George Dinwiddie <gdinwiddie at min.net>
> 
> Dan,
> 
> It sounds like you're talking about play caused by the tiller head
> slipping on the rudder post.  Is that right?

George,

No, I addressed both problems. The cap-screw is for the ocnenction to
the rudder post, but grinding the head fitting and filing the fitting on
the tiller, and adding the washers, was to reduce the play between the
tiller and the head-fitting.

--Dan S.
dans at stmktg.com

------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 899067458.0