[alberg30] Re: Mast Strength

Guy Lalonde guy.lalonde at sympatico.ca
Thu Nov 12 04:18:04 PST 1998


From: "Guy Lalonde" <guy.lalonde at sympatico.ca>

Paul,
according to the A30 spec sheet I have, the mast
is "oval 6 in. x 3.6 in. x 0.13 aluminum extrusion".
I assume the 0.13 is the wall thickness and that
it is in inches. The spec sheet must be for later
models because it does not mention a top loading
icebox.
Guy    Cyrena #466
guy.lalonde at sympatico.ca

-----Original Message-----
From: RABBIT649 at aol.com <RABBIT649 at aol.com>
To: alberg30 at onelist.com <alberg30 at onelist.com>
Date: Thursday, November 12, 1998 1:22 AM
Subject: [alberg30] Re: Mast Strength


>From: RABBIT649 at aol.com
>
>As owner of an early Alberg, I'm curious to know with what number the
thicker
>masts began, or the actual thickness.
>Paul Cicchetti
>Ashwagh #23
>
>------------------------------------------------------------------------
>To unsubscribe from this mailing list, or to change your subscription
>to digest, go to the ONElist web site, at http://www.onelist.com and
>select the User Center link from the menu bar on the left.
>


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 910873084.0


More information about the Public-List mailing list