[alberg30] Re: Mast Strength

[RABBIT649 at aol.com]

From: RABBIT649 at aol.com

Thanks Tom. I still haven't gotten a chance to measure my early one, but 3/32"
to 1/8" looks about right.
Paul
Ashwagh #23

In a message dated 11/16/98 4:21:42 PM, you wrote:

>From: Tom Sutherland <tomsu at uky.campus.mci.net>
>
>Paul............My mast just happens to be beside my house so I removed the
lower
>plate and put the mic on it.........the wall thickness runs between .185 &
.190
>(
>about 3/16 of an inch ) In my experience this is pretty heavy duty. I don't
believe
>the mast on my former boat ( Catalina 30 ) was near this thick.
>
>Tom S
># 412
>InCahoots
>
>RABBIT649 at aol.com wrote:
>
>> From: RABBIT649 at aol.com
>>
>> Dear Gordon and George,
>>         Thanks for reponding about the wall thickness. Next time I get out
to
>where
>> it's stored I'll get a caliper on it and let you know.
>> Regards,
>> Paul Cicchetti
>> #23 Ashwagh

------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 911370054.0