[alberg30] Re: DECK SPRING

[George Dinwiddie]

From: George Dinwiddie <gdinwiddie at min.net>

Greg,

I think that injecting resin has not given you a good bond.  To achieve
stiffness, both the upper and lower laminates have to be well bonded to
the core.  This should be a continuous bond.  I'm of the opinion that
injecting resin rarely works.

My solution (in progress) is to recore areas that are delaminated.  I
grind off the top laminate.  If the core is wet, I chisel it out and
replace it with plastic foam core.  Then I layup new glass on top.
This has to be faired, painted and, in appropriate areas, covered with
non-skid.

 - George


> greg vandenberg said:
> 
> From: greg vandenberg <fashionguy at ameritech.net>
> 
> ANYBODY OUT THERE GOT AN IDEA ON HOW TO STIFFEN THE A30 FORE DECK AND THE
> CABIN TOP? AFTER DRYING, INJECTING, PRIMING, PAINTING AND NONSKID. I HAVE
> HAIRLINE CRACKS AROUND THE CABIN SIDES TO FOR DECK AND AT THE MAIN HATCH
> OPENING. I TRY TO STEP LIGHTLY ON THE FORE DECK AND CABIN TOP BUT TO NO AVAIL.....

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.

 909084210.0