[alberg30] Re: cutlass bearing replacement

Joel,

I'll try to remember to take a copy of that drawing to work.  The
Alberg 30 Maintenance Manual, available to members of the 
association, is full of helpful articles written by members.  Then
there are articles in the monthly newsletter that haven't made
it into the Manual.  All in all, the annual dues are one of the
cheapest investments you can make in your boat.

 - George

> JANET LEMBO said:
> Thanks George, If you have a diagram of the drive assy, I shure would
> appreciate looking at it Fax (at work) 804-861-0111. I know this is not
> complicated I just like to put it all together in my head.. I don't
> know  what kind of condition the shaft is in. It seems stainless is the
> rule now. Thanks again, I know I will get around to joining the assn.
> soon. I can only be in so many things.. Joel


-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------