[alberg30] hard dodger for A30

Guy Lalonde lalondegc at videotron.ca
Fri Dec 3 20:05:15 PST 1999


From: Guy Lalonde <lalondegc at videotron.ca>

Joe,
I sent you a private e-mail with dodger photos. If anyone else is interested
let me know and I'll send a private e-mail. The dodger setup on my boat is a
little too high, the boom just barely clears it and when standing I don't
like to have to look through the dodger (which is the case), I like to be
able to see over a dodger, but that's my preference. It also extends a
little too far back and interferes with the winches but I just untie a rope
and fold it back, with a hard dodger you'd have to take that into
consideration. Unfortunately my mast is down and the dodger is removed so I
can't provide measurements, maybe someone on the list still has their rig up
and can provide the distance between the cockpit floor and the boom. From
there I suggest you make a cardboard mock up dodger before undertaking the
real thing, you'll be able to determine if it interferes with anything and
if it is aesthetically pleasing.

I checked out the hard dodger on the web site mentionned in Bob Kirk's
reply, it looks like the hard dodger is removable. I've heard of some that
are permanently glassed which may not be a good idea because a permanent one
might not appeal to a potential buyer (especially a die-hard racer). Also it
doesn't look like the "window" can be opened which I like to roll down on my
soft dodger on a warm day under sail or at anchor, it can get pretty hot
behind a dodger without a breeze flowing through.

Just my 2 cents.

Guy.
Cyrena #466

----- Original Message -----
From: Robert Kirk <kirk at neptune.gsfc.nasa.gov>
To: <alberg30 at onelist.com>
Sent: Saturday, December 04, 1999 3:15 AM
Subject: Re: [alberg30] hard dodger for A30


> From: Robert Kirk <kirk at neptune.gsfc.nasa.gov>
>
> >In another one of my ambitious winter projects I am attempting to
fabricate
> >a hard dodger for my A30. I once saw a hard dodger constructed by a
fellow
> >in North Carolina for his older Columbia 30-something. It was very
> >interesting.
>
> Joe... Check the nice hard dodger that Wayne Bower made from fiberglas for
> his Alberg 37:
>
>    http://users.erols.com/teelok/
>
>
> It did take him quite a while,though.  And remember, gentlemen don't go
> sailing when you need a dodger.
>
> Cheers,
> Bob Kirk
> Isobar #181
>
> 

--------------------------- ONElist Sponsor ----------------------------

    GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
  <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>

------------------------------------------------------------------------

 944280315.0


More information about the Public-List mailing list