[alberg30] Re: Cockpit access panel-Bomar #

[RABBIT649 at aol.com]

From: RABBIT649 at aol.com

Dear Gordon,
	Have you any info on the solid cast aluminum ones they use on workboats?
Paul Cicchetti
Ashwagh #23
In a message dated 2/23/99 12:48:44 AM, you wrote:

<<From: "Gordon E. White" <gewhite at crosslink.net>

Jack,
    The number of the Bomar aluminum frame 18 1/4 hatch in my West
Marine book is 117863, Bomar # N1070-10A.  The 20 1/4 square is 387664 /
N1080-10A, and the 22 x 22 is 117871/ N1039-10A
    The polycarbonate frames (only slightly cheaper) are 18 7/8 square
117897/ G-966-1111, 19 7/8 x 14 3/4  387797 / G927-1111and 21 7/8 square
117905/ G995-1111 The latter is priced in the catalog at $207.
    They also have a ventilated model 22 5/6" square at $294, p/n
NO686-10FX.

    I really don't think anything smaller than their larger hatches
would be worth the effort.

                                            - Gordon White A-275
>>


------------------------------------------------------------------------
If you like orange and blue, then you will love our new web site!
http://www.onelist.com
Onelist: Fostering connections and information exchange

 919939509.0