[alberg30] Re: dog house windows
Jacques Guerette
jguerett at nortelnetworks.com
Mon Feb 1 12:41:52 PST 1999
From: "Jacques Guerette" <jguerett at nortelnetworks.com>
Impressive test! Maybe we should wack a chunk of the doghouse to see what
happens!
Jacques
> -----Original Message-----
> From: Robert E Johns [SMTP:bobjns at nais.com]
> Sent: Monday, February 01, 1999 3:31 PM
> To: alberg30 at onelist.com
> Subject: [alberg30] Re: dog house windows
>
> From: Robert E Johns <bobjns at nais.com>
>
> Lee, Jacques, Tom, Stephen:
>
> I replaced our doghouse windows with 1/4 inch lexan, probably late 70s or
> early 80s. No problems with fogging. I had heard that UV affected the
> strength of lexan, but it is so strong to start off with that I don't
> think
> that it is really a problem. By the way, the original plastic I believe
> was
> plexiglas - only 3/16ths inch thick.
>
> When I was trying to decide what to use for the new windows, a dealer cut
> two blanks of lexan and plexiglas about 3 inches by 1 inch. He laid the
> plexiglas on a padded bench and said to tap it lightly with a hammer. I
> did
> and it shattered. Then he put the lexan down and said to hit it as hard as
> I could. Nothing happened to it. Later I was showing it to someone at
> work,
> I put it on a hard workbench and hit it with a marlinspike as hard as I
> could. It put a small dimple in the lexan, and I hurt my hand on the knife
> handle!
>
> I think that the 1/4 inch lexan is probably stronger than the sides of the
> doghouse. As I remember, the sides fit the 3/16 plexiglas fairly well, so
> they must be about 3/16 inch thick. If you plan to exceed the strength of
> 1/4 inch lexan, then you might want to think about beefing up the doghouse
> sides also.
>
> Just a thought.
>
> Regards,
> Bob
>
>
>
> ------------------------------------------------------------------------
> To unsubscribe from this mailing list, or to change your subscription
> to digest, go to the ONElist web site, at http://www.onelist.com and
> select the User Center link from the menu bar on the left.
------------------------------------------------------------------------
To unsubscribe from this mailing list, or to change your subscription
to digest, go to the ONElist web site, at http://www.onelist.com and
select the User Center link from the menu bar on the left.
917901712.0
More information about the Public-List
mailing list