[alberg30] alberg 35 muffler

[Furey, Bill (CORP)]

From: "Furey, Bill (CORP)" <bill.furey at corporate.ge.com>

Hi Rich- couple of questions: * How high is your muffler-mine's about 10 "
* how many inches do you have from your water input to top of muffler-good
ole boat recommends at least 12 "_I'll have about 10-11-is this critical? *
How did you brace your supports for your wood base for the muffler-mine's on
a 45 degree angle-will duct tape support it well enough while its curing?
Hope I make sense.  Thks, Bill

> ----------
> From: 	RichLem at aol.com[SMTP:RichLem at aol.com]
> Sent: 	Wednesday, July 14, 1999 1:43 PM
> To: 	alberg30 at onelist.com
> Subject: 	Re: [alberg30] alberg 35 muffler
> 
> From: RichLem at aol.com
> 
> Hi Bill
> We have a Verna lift muffler install just aft of the A4.  We installed it
> to 
> port of the dripless shaft seal, this allowed us to get to the seal for 
> adjustments.  I glass the wooden support in with temp supports with I
> removed 
> after it setup.
> BTW  Two years ago we installed a PSS seal, it's great 
> 
> --------------------------- ONElist Sponsor ----------------------------
> 
> Attention ONElist list owners.
> http://www.onelist.com
> We've just added a "NO ATTACHMENTS" option.  See homepage for details.
> 
> ------------------------------------------------------------------------
> 

--------------------------- ONElist Sponsor ----------------------------

What is "FRIENDS & FAMILY?"
http://www.onelist.com
It's a new program at ONElist.  See homepage for details.

------------------------------------------------------------------------

 931977284.0