[alberg30] mast-step repair

[FINNUS505 at aol.com]

From: FINNUS505 at aol.com

Hi gang,
With all this talk of fiberglass work, I just want to make one addition I 
learned from the West manual which is very helpful;
When you are using thickened resin, you should wet down the contact surfaces 
with unthickened resin first to assure good adhesion, then put your thickened 
resin and glass on top of the pre-wetted surfaces.
Hope this helps,
Lee
Stargazer #255

------------------------------------------------------------------------
Give back to your community through "Grow to Give."
http://www.ONElist.com
See homepage for details.

 928246576.0