[alberg30] water tank

[George Dinwiddie]

From: George Dinwiddie <gdinwiddie at min.net>

What is your hull number?

I've got a newer boat (#543) and the aluminum top of the tank is
easily reached.  You pull out the V-berth cushions and the plywood
panels under them.  This exposes most of the aluminum plate.  I
seem to recall that the aft end is a little harder to reach, but
I'll cross that when I go to fix the leaking rivets and corrosion
problems.  I also plan to paint the inside of the tank with epoxy
while I have the top off.

 - George

> Shawn Orr said:
> 
> how do I go about putting an inspection port in?

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
Looking to expand your world?
http://www.onelist.com
ONElist has over 165,000 e-mail communities from which to choose!

 928793832.0