[alberg30] Re: A4 exhaust part 2

[George Dinwiddie]

From: George Dinwiddie <gdinwiddie at min.net>

Joe,

Most boats have exhaust systems that have been modified since they 
left the factory.  On my boat, I disconnect the hose that connects
the mixing pipe to the waterlift muffler.  At the worst, you may have
to cut one of the exhaust pipes.  Since you'll probably be replacing
it anyway, this shouldn't be of much concern.

 - George


> Joe Tokarz said:
> 	[snip]
> The manifold I guess unbolts from the rest of the engine block, then, but
> where will the exhaust pipe be disconnected from the exhaust system? At the
> base of the bronze water lift? Or at the elbow some where? Will this
> unscrew from here? If the pipe sheers, is it a problem betting the rest of
> it removed? Maybe you remove the whole thing- manifold, elbow, and water
> lift?


-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
The possibilities are endless!
http://www.onelist.com
ONElist has something for everyone!

 925994598.0