[alberg30] More Bow Chocks- but newer

[Tom Sutherland]

From: Tom Sutherland <tomsu at uky.campuscw.net>

Gordon,
    You are absolutely right ... I should have said "Standard" rather than
SAE. Also, I am not saying that is what it is but just looking at the hole
with the untrained eye that is what I would guess it is.

    Can you tell me anything about a "Jet-16" Drilling/Milling Machine. I
have a neighbor who wants to sell one he bought about 1980 or 81 and has
used it very little. I have not used one at all but can't think it would be
a pretty nice addition to my mostly woodworking shop.

    Any help would be appreciated ... go off line if you think this would
be of little interest to the list.

Tom S





Gordon E. White wrote:

> From: "Gordon E. White" <gewhite at crosslink.net>
>
> not to be fussy, but 1/4-20 is standard or English,  not SAE thread,
> which on a 1/4" dia would be 28 threads per inch. Standard or English is
> generally coarse thread while SAE is fine thread. Most things threaded
> into castings are coarse thread. (generally)
>                         - Gordon White
>
> ------------------------------------------------------------------------
> Star Wars fans are using ONElist to share the fun.
> http://www.onelist.com
> Are you?




------------------------------------------------------------------------
The possibilities are endless!
http://www.onelist.com
ONElist has something for everyone!

 926005272.0