[alberg30] Remove step plate

Guy Lalonde lalondegc at videotron.ca
Wed Nov 24 15:43:09 PST 1999


From: Guy Lalonde <lalondegc at videotron.ca>

Russ,

I guess you're talking about the plate that is attached to the bottom end of
the mast, the "mast shoe" if you will. The way you do it is a good idea and
I've seen it done that way on another A30. However if you have a control
line organizer, which is fitted between the mast step and the mast shoe, it
could interfere with the removal of that bolt unless you made the organizer
with some kind of slot on each side to allow for it.

Guy.
Cyrena #466

----- Original Message -----
From: <Rap1208 at aol.com>
To: <alberg30 at onelist.com>
Sent: Thursday, November 25, 1999 1:25 AM
Subject: Re: [alberg30] Remove step plate


> From: Rap1208 at aol.com
>
> Just a thought gentlemen, are you pulling the mast  with the plate?  I
just
> remove the stainless bolt that holds the mast to the plate.  I only have
to
> locate one bolt hole in the spring, not 4. I tried that once
> Russ Pfeiffer
>
> 

 943486989.0


More information about the Public-List mailing list