[alberg30] Re: Alberg Molds Found

[John Birch]

Mark;

On behalf of the Great Lakes Alberg Association thank you for your
efforts, this is wonderful news.
I have forwarded the history of your search to our Senior Board Members
and Alberg owners so that your efforts are recognized.

You have done us all a great service, and may I wish you all the best.

If there is anything I can do to reciprocate, let me know.

Again, thank you and fair winds,

John Birch,
Past Commodore, Great Lakes Alberg Association


   Subject:     Alberg Molds Found
   Date:         Tue, 23 Nov 1999 11:41:57 -0500
   From:        "mmatthews" <mmatthews at sailnet-inc.com>
     To:         <sunstone at idirect.com>

John:

Greetings again. I finally spoke with Bill Boyle of Boyle Boatworks and
your preliminary hunch that they had the molds has proved to be correct.
They  have the Alberg 30, the Alberg 37, and the Whitby 45 molds. Bill
Boyle's email is wboyle at aol.com and fax is 803.733.2984. Hope this helps
and good luck.

Mark Matthews


From:        "mmatthews" <mmatthews at sailnet-inc.com>
     To:         <sunstone at idirect.com>

John:

I gave them a ring, but haven't heard back yet.


Mark Matthews
SailNet.com

Subject:         Boyle Boat Works, Alberg Molds, alberg molds continued
   Date:         Sun, 14 Nov 1999 00:04:36 -0500
   From:         John Birch <sunstone at idirect.com>
     To:         mmatthews <mmatthews at sailnet-inc.com>


Mark Matthews;

Boyle Boat Works, in Columbia SC.  Phone: 803-252-8210
address; PO  Drawer 50126, Columbia, SC 29250 is the last known address
for the Alberg molds.

If you have anymore information, I would appreciate it.

Thanks again,

John Birch

Subject:         alberg molds continued
   Date:         Tue, 19 Oct 1999 12:32:08 -0400
   From:        "mmatthews" <mmatthews at sailnet-inc.com>
     To:         "sunstone" <sunstone at idirect.com>

John:

According to a local broker here Whitby molds made it to Ft. Myers Ship
and
Yacht Building where they turned out Brewer 42 and 44s. Ft Myers Ship
and
Yacht went broke but you might find some answers at 941.332.7800. Joe
was
who I was referred to, though he wasn't in at the time and again brokers

seem pretty knowledgable in these areas if you can look one up down
there.
Additionally the broker I talked to here seemed to think that calling
Cape
Dory might be helpful in tracking down the Alberg molds. Anyway keep us
posted and good luck.

Mark Matthews
SailNet.com


Subject:         Re: Alberg 30, 37 molds whereabouts
   Date:         Wed, 13 Oct 1999 09:55:16 -0400
   From:        "mmatthews" <mmatthews at sailnet-inc.com>
     To:         <sunstone at idirect.com>
    CC:         <cboyle at sailnet.com>

> sunstone at idirect.com wrote:

>I am wondering if you are, or are related to, the Boyle's of Boyle Boat

>Works and whether you know the fate of the Alberg 30 and Alberg 37
>molds?
>Are these molds still available?
>If you could forward me to someone who might know these answers, should

>you not, it would be appreciated.
>Thank you,
>John Birch, Past Commodore, Alberg Great Lakes Association


John:

We are not related to Boyle Boat Works. As to the fate of the Alberg 30
and
Alberg 37 molds, Whitby Boat Works of Ajax, Ontario, Canada was the
original
builder of the Alberg line. While my attempts in tracking down the molds
was
unsuccessful, you might have luck calling yacht brokers in the Ontario
area
who may know something of their whereabouts.. There are also a number of

Alberg web sites who could perhaps refer you to another source, as well
as a
number of Alberg boat owners who have left their reviews in our
BoatSource
section of SailNet:
http://www.sailnet.com/boatcheck/review.cfm?Input=alberg%2035&ID=924
http://www.sailnet.com/boatcheck/review.cfm?Input=alberg%2037&ID=1360
http://www.sailnet.com/boatcheck/review.cfm?Input=alberg%2037&ID=760
http://www.sailnet.com/boatcheck/review.cfm?Input=alberg%2037&ID=2428

The following books may also be of interest to you:


Best Boats to Build or Buy
http://www.sailnet.com/store/merchant.ihtml?pid=204&step=4&USER=-2001653218

Understanding Boat Design
http://www.sailnet.com/store/merchant.ihtml?pid=771&step=4&USER=-2001653218

Good luck with your search, and if you find the molds and revive the
line, I
’m interested.

Good luck and Good Sailing.
Mark Matthews
SailNet.com



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/19991123/d0d20f87/attachment-0007.htm>