[alberg30] zinc

[Scott Wallace]

From:	Scott Wallace <tristan at one.net>

Can you use zincs on outboards, too?

Scott

Robert Kirk wrote:

> From: Robert Kirk <kirk at neptune.gsfc.nasa.gov>
>
> At 09:43 AM 11/17/99 -0500, George Dinwiddie wrote:
>
> >Anytime you have dissimilar metals in a conductive solution,
> >you'll get electrolytic corrosion.  Fresh water is not nearly
> >so conductive as salt, so the speed of the corrosion may be
> >slower, but it'll still happen.  Zincs are a cheap means of
> >protecting your bronze.
>
> George is right, you do need them.  I use one of those teardrop shaped
> zincs that fit on an adapter which screws onto the end of the
> propeller.  They are readily available in the boat stores and simplicity to
> replace each year.  Each year it comes off corroded enough to show that I
> was right to use one, but not completely corroded away.
>
> I have heard that some configurations don't have enough room between the
> end of the shaft and the rudder to fit them, but they only require an inch
> or two.
>
> Bob Kirk
> Isobar #181
>
> 

--------------------------- ONElist Sponsor ----------------------------

    GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
  <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>

------------------------------------------------------------------------

 942873625.0