[alberg30] Remove step plate

[A30240 at aol.com]

From: A30240 at aol.com

Having used helicoils on engines, I like them.  By the time I replaced my AT4 
it had four or five put in.  One thought about using them on the mast step 
would be to use never-sieze on the machine screws.  The helicoil itself is 
larger in diameter than the hole that the machine screw goes through.  If it 
ever locks up, and you end up "verbally abusing" the helicoil, screws, mast 
step, et al with children around ........

Jim Davis
Isa Lei
240

--------------------------- ONElist Sponsor ----------------------------

    GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
  <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>

------------------------------------------------------------------------

 943492644.0