[alberg30] non skid deck pattern reprod.

[FINNUS505 at aol.com]

From: FINNUS505 at aol.com

In a message dated 10/21/99 8:29:09 PM Eastern Daylight Time, 
alberg30 at interactive.net writes:

<< Has anyone got an easy way to re-create the non-skid area in some places
 where I reglassed or sanded down the original grid? I plan to eventually
 cover all non-skid with epoxy encapsulated model train sand and then paint
  >>
Hey Joe,

I remember reading an article in a sailing magazine about reproducing the 
non-skid pattern of the deck in a repaired area.  The basic premise was to 
make a mold of the pattern from an unafected area with silicone caulking 
material.  If I remember correctly, you spray the area to be copied with a 
seperation solution of some description to prevent adhesions, then plaster 
the area with a thick carpet of silicone bedding compound.  Once set, you 
carefully pull up the silicone, and voila, you have a mold of the pattern.  
Spray the mold with more seperation solution, mix up some epoxy, and then you 
can put the pattern on the deck whereever you want.

Bear in mind I am just writing what I remember from reading this old article. 
 Maybe the books on restoring old fiberglass boats will have more specific 
instructions.  In fact, I'm sure they would be more specific!!

Hope this helps,
Lee
Stargazer #255

--------------------------- ONElist Sponsor ----------------------------

    GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
  <a href=" http://clickme.onelist.com/ad/gator3 ">Click Here</a>

------------------------------------------------------------------------

 940603416.0