[alberg30] rudder shoe
George Dinwiddie
gdinwiddie at min.net
Tue Sep 14 18:42:43 PDT 1999
From: George Dinwiddie <gdinwiddie at min.net>
> Bill DeWitt said:
>
> As I have (our just acquired) 'Simple Gifts' #249 in the yard I can measure
> that height tomorrow and let you know. Does anyone know what's to be done
> with beheaded fasteners that afix the shoe at the base of the rudder to the
> keel? On each lateral edge they are headless within the countersunk
> aperture. The aft one appears to be neither a screw or bolt?? The joint of
> the shoe to the keel shows a slight hairline fissure...help...thanks..
Bill
The ones on the sides should be flat-head slotted screws. Even if
they're intact, I'd bet the slots are filled with paint. The aft
one should be a hex bolt.
You can probably cut a new slot in the machine screws, if you have
to. If not, you could drill them out (the minimum amount necessary)
and, after pulling the shoe, grab the stub with vice-grips to remove
them. The same will work on the aft shoe.
Use bronze bolts when you put them back in. Stainless will get
crevice corrosion there. Bruce Rankin recommends bedding with 3M
5200. You can always use a propane torch to heat the shoe and
soften the caulk when you need to remove it. In fact, you might need
to do that this time.
- George
--
----------------------------------------------------------------------
George Dinwiddie gdinwiddie at min.net
The gods do not deduct from man's allotted span those hours spent in
sailing. http://ourworld.compuserve.com/homepages/Alberg30/
----------------------------------------------------------------------
--------------------------- ONElist Sponsor ----------------------------
GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
http://www.onelist.com/ad/gator1
------------------------------------------------------------------------
937359763.0
More information about the Public-List
mailing list