[alberg30] Wrinkled Varnish

[Gord Laco]

Hello -

Wrinkled varnish is caused by an application that is too thick.  The cure is
simple - sand it off, and apply a thinner coat.   In my wooden boat days I
always thinned coats until the last coat... and used a foam brush in order
to make each coat as thin as possible.

Gord - A KC426
----- Original Message -----
From: Bill Newman <bnewman at netcom.ca>
To: alberg30 at onelist.com <alberg30 at egroups.com>
Sent: Tuesday, April 25, 2000 8:39 AM
Subject: [alberg30] Wrinkled Varnish


> I have used Epiphanes varnish for the last 4 years on Marion Rose and
> have been very pleased with it.  I have applied two additional refresh
> coats this year, sanding between coats.  When the second coat dried
> there were several wrinkle spots.  Does anyone know the cause of this
> and the cure?
>
> Bill Newman
> Marion Rose III, #233
>
>
> ------------------------------------------------------------------------
> Bids starting at $7 for thousands of products - uBid.com
> http://click.egroups.com/1/3027/5/_/476031/_/956666096/
> ------------------------------------------------------------------------
>
>


------------------------------------------------------------------------
Good friends, school spirit, hair-dos you'd like to forget.
Classmates.com has them all. And with 4.4 million alumni already 
registered, there's a good chance you'll find your friends here:
http://click.egroups.com/1/2885/5/_/476031/_/956668320/
------------------------------------------------------------------------


 956667984.0