[alberg30] Permanent Moorings

[finnus505 at aol.com]

In a message dated 4/30/00 3:33:24 PM Eastern Daylight Time, 
rjohns3 at optonline.net writes:

<<   Northport Harbor Advisory Board requirements that I summarized in a
 previous posting recommends that the swivel be a size larger than the
 largest of the chains. This means that if the larger (lower) chain is 1/2
 inch, as recommended for an Alberg 30, then the swivel should be 5/8 inch.
 They also state that the swivel must be of the eye to eye type rather than
 the eye to jaw type. They say that while a swivel may assist in limiting
 twist it, often is the first part of a mooring to fail.
 
 Hope this is helpful,
 
 Bob Johns
 Wind Call #397
  >>
Guess it's not just me, then! :)  
Lee

------------------------------------------------------------------------
Was the salesman clueless? Productopia has the answers.
http://click.egroups.com/1/3019/5/_/476031/_/957125354/
------------------------------------------------------------------------


 957125347.0