[alberg30] Noise from wires inside mast

[George Dinwiddie]

Scott,

I've not seen our solution, yet.  We used long plastic wire ties.  
Hook them together around the wire bundle, three at a single point,
spaced about 12 to 18 inches apart.  Leave the tails long.  They force
the wire bundle to the side of the mast.

Beware of solutions that may make it difficult to run new wires in the
future.

 - George

> Cushman, Scott [IT] said:
> 
> Hi Folks - 
> 
>  Has anyone come up with a solution for the clanging of the wires inside
> the mast ?  I tied off the halyards the other night expecting to have a
> quiet
> night but soon realized most of the noise was inside the mast. I'd like to
> try
> something to fix this next season.

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                         NEW URL => http://www.Alberg30.org/
 ----------------------------------------------------------------------


--------------------------------------------------------------------<e|-
Get a NextCard Visa, in 30 seconds! Apply NOW!
1. Fill in the brief application
2. Receive approval decision within 30 seconds
3. Get rates as low as 0.0% Intro APR and no annual fee!
http://click.egroups.com/1/7874/10/_/476031/_/965696048/
--------------------------------------------------------------------|e>-



 965695913.0