[alberg30] Painting Topsides

[Alan P. Kefauver]

I did the entire interior of Andante with Brightside. The single part Urethane. Looks great, one coat covers well as long as you prime with Brightside primer first.The primer also acts as a leveling agent and fills minor voids so that the brightside top coat is very smooth. Wear a vapor mask when painting inside though, not a paper or cloth one either.
Alan
*********** REPLY SEPARATOR  ***********

On 8/7/2000 at 9:50 AM Horton, Ross G. wrote:

>John:
>	I have successfully used the one part International product called
>"Brightside" on two occasions.  The product flowed well and the gloss was
>remarkable. Like the two part product it is a two man job since the paint is
>thin and dries very fast.  Have the tipper follow along with a foam brush to
>take out the bubbles.  Try it on a test panel first or on a small area under
>the transom.
>	I think that the primary difference between the one part and the two
>part products is the increased durability of the two part.  The first paint
>job that I did to my old Rhodes Meridian was a light gray that has held
>beautifully up for about 8 years.  I then helped paint another boat with a
>dark blue that went on well but began to fade and lose its gloss after about
>3 or 4 years.  If you are planning on a dark color I'd recommend the two
>part product.
>
>Ross Horton
>Delphi #40  
>
>




--------------------------------------------------------------------<e|-
FREE newsletters from PC World, the source for technology advice.
Hot Shareware, Daily Product Review, Computer News Alert, and more!
Sign-up now!
http://click.egroups.com/1/8007/10/_/476031/_/965656336/
--------------------------------------------------------------------|e>-



 965656235.0