[alberg30] engine mount bolts

[RacerXat39 at aol.com]

  I did change or re installed my motor also just recently on number 463!!
   I also had a few bolts that broke inside.... I drilled them starting with 
a smaller drill and worked my way up till nothing was left inside....Then ran 
the same size tap through it as it should be...I forget what size they are at 
the moment..
  Another had a peice of it sticking out a bit....I drilled it and used a 
peice of square steel pounded to the center with a hammer and unscrewed 
it....You have got to take your time with it what ever you do....DO NOT DRILL 
IT TO NEXT SIZE!!
   Or epoxy it as it is metal and your motor ground also!!!!!   It is a steel 
plate under the fiberglass with threaded holes for the motor mount bolts...or 
steel squares wrather.. This is my first Alberg also....and im no expert..
   Just my way of doing it!!
                                                  Scott

-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/1/_/476031/_/976181479/
---------------------------------------------------------------------_->



 976181473.0