[alberg30] Fiberglass matt & epoxy

[Guy Lalonde]

From: Guy Lalonde <lalondegc at videotron.ca>

Is there a glass matt that is compatible with epoxy ?  I haven't found any
up my way. The catalogs I've seen all say compatible with polyester resin
(they don't mention anything about epoxy). When you ask a salesperson, they
all say "Oh yeah, of course". Not convincing to me.

If there is no such thing as epoxy compatible glass matt, what would you use
instead if you wanted to stick with epoxy ?

Guy
Cyrena #466

----- Original Message -----
From: <Rap1208 at aol.com>
To: <alberg30 at onelist.com>
Sent: Wednesday, February 16, 2000 12:47 AM
Subject: Re: [alberg30] rudders


> From: Rap1208 at aol.com
>
> Thanks Rich, I didn't know that about matt and epoxy, I just went ahead
and
> did it.
>   That repair was about 3 years ago, so I'll start looking for it to fall
off
> sometime soon.
>
> Regards Russ Pfeiffer
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GET A NEXTCARD VISA, in 30 seconds.  Get rates as low as 2.9 percent
> Intro or 9.9 percent Fixed APR and no hidden fees.  Apply NOW.
> <a href=" http://clickme.onelist.com/ad/NextcardCreative4SR ">Click
Here</a>
>
> ------------------------------------------------------------------------
>
>


--------------------------- ONElist Sponsor ----------------------------

Get what you deserve with NextCard Visa. Rates as low as 2.9 percent 
Intro or 9.9 percent Fixed APR, online balance transfers, Rewards 
Points, no hidden fees, and much more! Get NextCard today and get the 
credit you deserve! Apply now! Get your NextCard Visa at
<a href=" http://clickme.onelist.com/ad/NextcardCreative2SR ">Click Here</a>

------------------------------------------------------------------------


 950750834.0