[alberg30] main wiring harness

[Rap1208 at aol.com]

From: Rap1208 at aol.com

Joe, when I bought my boat, the instrument panel glass was cracked.  the 
first winter I puled it out, and took it home,  I dismanteled it, (not too 
hard,) and removed the broken glass.  I replaced it with plastic,  which has 
surrived so far.  The panel did look tired.  I painted it a neat gold color,  
while the instruments were out.  I carefully went over the black part with a 
sharpie pen, and wide marker, and made the black dark again.  I also replaced 
the burned out voltage regulater.  Bought a cheap unit at the auto parts 
store, took it apart, trimed the face to size and installed it in the panel.  
I also used a little caulk on reasembly. When I put the whole thing back 
together it looked so much better.  
Also, on this subject, the 1st summer I made a "U" shaped of teak that went 
around the panel on front, back and top.  It's about 1" thick, and protects 
the switches, and choak knob.  No one has kicked the knob off after that.
Always something to do on a boat.

Russ  251

--------------------------- ONElist Sponsor ----------------------------

GET A NEXTCARD VISA, in 30 seconds.  Get rates as low as 0.0 percent 
Intro or 9.9 percent Fixed APR and no hidden fees. Apply NOW. 
<a href=" http://clickme.onelist.com/ad/NextcardCreative5SR ">Click Here</a>

------------------------------------------------------------------------


 950845326.0