[alberg30] main wiring harness

[Rap1208 at aol.com]

From: Rap1208 at aol.com

Joe, no I don't recall the brand, but it was a cheapie, with a plastic face 
inside that I was able to trim with a sissors  Cost mabye 5, .6 bucks.
In my message I said I used a little caulk when I put the thick plastic and 
metal surround back on the instrument panel.    Perhaps you didn't under 
stand my comments about the wood surround.  In the cockpit, around the 
instrument panel, and the switches,there is a wood piece about 1 1/2 inch 
deep, across the top, and extending down each side.  This keeps the crews' 
terrible feet off the choke handle, and switches, and protects the front 
glass, (plastic) part too  I had a wood shop make it out of teak, but you 
could do it yourself, and even use another wood.
   Does that help?

    Russ

--------------------------- ONElist Sponsor ----------------------------

Get what you deserve with NextCard Visa. Rates as low as 2.9 percent 
Intro or 9.9 percent Fixed APR, online balance transfers, Rewards 
Points, no hidden fees, and much more. Get NextCard today and get the 
credit you deserve. Apply now. Get your NextCard Visa at
<a href=" http://clickme.onelist.com/ad/NextcardCreative1SR ">Click Here</a>

------------------------------------------------------------------------


 950899080.0