[alberg30] cabin sole

[finnus505 at aol.com]

From: finnus505 at aol.com

In a message dated 2/21/00 9:02:22 AM Eastern Standard Time, dsail at gte.net 
writes:

<< llo all,
 this is not a very technical question, but your advice so far has been 
great. so, is there a consensus on what to put on the teak sole after 
sanding. i have been using gloss varnish everywhere else, but am wondering 
about the maintenance/safety issue for the sole. 
 all comments welcome 
 dan
 rascal #145
  >>
Hey Dan,
If the cabin sole gets splashed, there is no slicker surface than varnish!
You can add sand to the last coat, or put down friction strips, like in a 
tub, or if the sole is solid teak, not a plywood veneer, you can leave it 
unfinished, and periodicaly bronze wool it, or bronze wire brush it, to keep 
it looking nice.
Hope this helps,
Lee
Stargazer #255


 951413185.0