[alberg30] bfilge pump

Tom Sutherland sutherlandt at prodigy.net
Tue Jan 18 07:45:22 PST 2000


From: Tom Sutherland <sutherlandt at prodigy.net>

Thanks Kevin ! ... I will check out Home Depot . Might need the weight
of the Gal pipe however to keep it in the bilge.

Tom
A30  #412
InCahoots


TheBlancs at cs.com wrote:

> From: TheBlancs at cs.com
>
> To make the "strainer" I used something around a 1/4" or 3/8" drill
> bit and
> bored as many holes as I could, leaving just 1/8" or so between them.
>
> I think the galvie fitting was 1-1/4". It might be good to use a PVC
> adapter/bushing to increase the size of the end cap to that used for
> 2" pipe,
> just to get a little more strainer area. That wouldn't cost much more
> and
> would assure that there was no decrease in flow.
>
> I saw a PVC shower drain with a stainless cover at Home Depot that
> might work
> even better... :-)
> -----------------------------------------------------------------------
>                           [ONElist Sponsor]
>               Please click above to support our sponsor
> -----------------------------------------------------------------------
>


--------------------------- ONElist Sponsor ----------------------------

Get great offers on top-notch products that match your interests!
Sign up for eLerts at:
<a href=" http://clickme.onelist.com/ad/elerts1 ">Click Here</a>

------------------------------------------------------------------------


 948210322.0


More information about the Public-List mailing list