[alberg30] A4 engine mounts in A30

[A30240 at aol.com]

From: A30240 at aol.com

Kevin

While I still had the AT4 I had to do some alignment.  Not much but a little. 
 The plywood had compressed, so I added thin sheets of steel to build the 
thickness.  It is slow and tedious, but works.  You could also use thin 
aluminium.  The steel I used was from a piece of 4" duct bought at Hechingers 
(of course you will have to go the Home Depot now).  I used tin snips to cut 
it into 2" wide strips and inserted it one strip at a time between the ply 
and the steel motor bracket.

Jim Davis
Isa Lei
240

--------------------------- ONElist Sponsor ----------------------------

Get great offers on top-notch products that match your interests!
Sign up for eLerts at:
<a href=" http://clickme.onelist.com/ad/elerts1 ">Click Here</a>

------------------------------------------------------------------------


 948251754.0