[alberg30] leak
Thu Jul 13 09:58:24 PDT 2000
Sanders,
I've got a newer hull (#543) and the tank is molded into the hull.
Actually, the bottom surfaces ARE the inside of the hull. The
plywood panels of the vberth are all removeable, but the tank
extends aft under the "seat" in the middle of the vberth.
I'm not sure of the details in the older boats. You might send
an email to Mike Lehman (he's not on this list, but his email
address is in the book). He completely restored Valency, Tony
Fortnam's boat.
- George
> sandersm at aol.com said:
>
>
> In a message dated 7/12/00 3:25:56 PM, gdinwiddie at min.net writes:
>
> >I've also heard of some boats having the tanks leak at other
> >points, either due to cracks or voids in the fiberglass.
> >
>
> George, does this mean that the tank is molded into the hull, with an
> aluminum top? Do you know the clearance from the top to the bottom of the
> V-berth plywood?
>
> Many thanks,
>
> Sanders.
--
----------------------------------------------------------------------
George Dinwiddie gdinwiddie at min.net
The gods do not deduct from man's allotted span those hours spent in
sailing. NEW URL => http://www.Alberg30.org/
----------------------------------------------------------------------
More information about the Public-List
mailing list