[alberg30] Engine Water Intake, flushout valve

[Guy Lalonde]

Tom.

Yeah, 1 inch may be a little large. I guess it depends on your engine's
cooling requirements.

Guy
#466

----- Original Message -----
From: Tom Sutherland <sutherlandt at prodigy.net>
To: <alberg30 at egroups.com>
Sent: Monday, July 17, 2000 11:19 PM
Subject: Re: [alberg30] Engine Water Intake, flushout valve


> Guy ... I would definatly replace the gate valve. I believe I noticed
> that the smalest Forespar unit was one inch. Do you think this is a bit
> large for an A30? I believe my boat has a ball valve of about 1/2 inch.
> servicing the engine intake.
>
> Tom S
> A30  412
>
> Guy Lalonde wrote:
>
> > Tom,
> >
> > sounds like a pretty nifty solution.
> >
> > I guess the device proposed by Forespar might appeal more to someone
> > who has
> > to change the gate valve on the engine intake anyway because it may be
> > badly
> > corroded (like most of the gate valves of my boat). The price
> > difference
> > between a new seacock (not a gate valve) and this Forespar thing might
> > be
> > pretty close.
> >
> > Cheers,
> > Guy
> > #466
>
>
>
> ------------------------------------------------------------------------
> Get a NextCard Visa, in 30 seconds!
> 1. Fill in the brief application
> 2. Receive approval decision within 30 seconds
> 3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
> http://click.egroups.com/1/6631/10/_/476031/_/963890313/
> ------------------------------------------------------------------------
>
>





 964004085.0