[alberg30] Engine Water Intake, flushout valve

[Tom Sutherland]

Guy ... I would definatly replace the gate valve. I believe I noticed
that the smalest Forespar unit was one inch. Do you think this is a bit
large for an A30? I believe my boat has a ball valve of about 1/2 inch.
servicing the engine intake.

Tom S
A30  412

Guy Lalonde wrote:

> Tom,
>
> sounds like a pretty nifty solution.
>
> I guess the device proposed by Forespar might appeal more to someone
> who has
> to change the gate valve on the engine intake anyway because it may be
> badly
> corroded (like most of the gate valves of my boat). The price
> difference
> between a new seacock (not a gate valve) and this Forespar thing might
> be
> pretty close.
>
> Cheers,
> Guy
> #466



------------------------------------------------------------------------
Get a NextCard Visa, in 30 seconds!
1. Fill in the brief application
2. Receive approval decision within 30 seconds
3. Get rates as low as 2.9% Intro or 9.9% Fixed APR
http://click.egroups.com/1/6631/10/_/476031/_/963890313/
------------------------------------------------------------------------


 963890354.0