[alberg30] Transducer Mounting

[Alan P. Kefauver]

Mounted my Nexus transducer in the original waterbox and just shimmed it level at the box. Works great.
Andante #152
*********** REPLY SEPARATOR ***********

On 6/21/2000 at 8:37 AM John Birch wrote:
Determine the angle. 
Cut a PVC Tube at an angle that makes it vertical and bond it to the hull with epoxy or 5200 and fill it with mineral oil - put transducer through a plastic cap for the tube and use the screw threads on the transducer to lock it in place. 
John 
Bill Newman wrote: 
I am replacing the old rotary depth sounder with the modern type.  I 
have the type of transducer that is to be mounted inside the hull.  The 
directions state that it should be mounted at an angle of not more than 
15 degrees to horizontal.  It seems the angle of the hull is much 
steeper than this.  I believe the typical mounting location is under the 
forward section of either settee.  Does anyone have any suggestions of 
the best way to resolve the steep angle problem? 
Bill Newman 
Marion Rose III #233 
------------------------------------------------------------------------ 
SALESFORCE.COM MAKES SOFTWARE OBSOLETE 
Secure, online sales force automation with 5 users FREE for 1 year! 
http://click.egroups.com/1/2658/10/_/476031/_/961582948/ 
------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20000621/37351b1e/attachment-0004.htm>