[alberg30] Transducer Mounting

[John Birch]

Determine the angle.

Cut a PVC Tube at an angle that makes it vertical and bond it to the hull
with epoxy or 5200 and fill it with mineral oil - put transducer through a
plastic cap for the tube and use the screw threads on the transducer to lock
it in place.

John

Bill Newman wrote:

> I am replacing the old rotary depth sounder with the modern type.  I
> have the type of transducer that is to be mounted inside the hull.  The
> directions state that it should be mounted at an angle of not more than
> 15 degrees to horizontal.  It seems the angle of the hull is much
> steeper than this.  I believe the typical mounting location is under the
> forward section of either settee.  Does anyone have any suggestions of
> the best way to resolve the steep angle problem?
>
> Bill Newman
> Marion Rose III #233
>
> ------------------------------------------------------------------------
> SALESFORCE.COM MAKES SOFTWARE OBSOLETE
> Secure, online sales force automation with 5 users FREE for 1 year!
> http://click.egroups.com/1/2658/10/_/476031/_/961582948/
> ------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20000621/99bf6975/attachment-0008.htm>