[alberg30] Wiring Schematic

[Alan P. Kefauver]

NOTE......NOTE
One change is important. The BB+ is connected to the BATT side of the ignition key switch instead of the IGN side so that the Bilge Blower is hot whether the ignition switch is on or not. This is necessary so you can blow out the bilge prior to starting the engine without burning the points.The Batt side of the switch is hot whenever the Engine Battery switch is on. Future versions of my diagram are changed, but this one slipped through.
APK
*********** REPLY SEPARATOR  ***********

On 6/25/2000 at 9:51 PM Alan P. Kefauver wrote:

>For what they are worth, here are the schems I have made in pdf form. There may have been a few minor changes, but they are relatively accurate for Andante. The starter curcuit schem is for the Grey Marine 25 with the standard panel. I don't know how this translates to an Atomic 4. No warranty expressed or implied. Everything works and was passed on by a top marine surveyor for insurance purposes.
>Alan
>Andante #152
>*********** REPLY SEPARATOR  ***********



------------------------------------------------------------------------
Was the salesman clueless? Productopia has the answers.
http://click.egroups.com/1/4633/10/_/476031/_/961986504/
------------------------------------------------------------------------


 961986322.0