[alberg30] Coaming holes

[Shawn Orr]

Cleat?

----- Original Message -----
From: Brian Zinser <bzinser at nmu.edu>
To: <alberg30 at egroups.com>
Sent: Tuesday, June 27, 2000 8:02 AM
Subject: [alberg30] Coaming holes


> This spring I stripped my brightwork.  When I was working on the coaming,
I
> came across 4 screw holes on each side (outside) immediately in front of
the
> large forward winch blocks.  The holes look like they held a small
> rectanaglular identification plate.  I know several Pearsons have the name
> of the builder and the model in this location.  Does anyone have similar
> holes? And, if so, what do they mount to the outside of the coaming?
>
> Brian A. Zinser
> Manana #134
>
>
> ------------------------------------------------------------------------
> Hope this isn't too offensive- trust me, it's better than the Elian one.
> http://click.egroups.com/1/6002/10/_/476031/_/962120636/
> ------------------------------------------------------------------------
>
>
>



------------------------------------------------------------------------
CLICK HERE AND START SAVING ON LONG DISTANCE BILLS TODAY!
http://click.egroups.com/1/4125/10/_/476031/_/962130626/
------------------------------------------------------------------------


 962121222.0