[alberg30] Mast Issues

[Alan P. Kefauver]

Yeah!!!! Worked. Came up from the bottom for the steaming/deck light.Fished it out with a hook.  But ran into the top fitting running up for the anchor light. So ran it down from the top. Both cables are in. The fitting at the top of the mast is a bear to drill for mounting the anchor light. Got in 1.5 screws, and had to quit because of heat and dehydration. Will finsih the install one cool evening soon.
Thanks for all the advice.
APK
Andante#152 (one step closer to launch)
*********** REPLY SEPARATOR  ***********

On 5/6/2000 at 10:40 PM Mpete53 at aol.com wrote:

>You would be surprised how far an electrician can push a fish tape tough bent 
>conduits.
>
>I usually like to have the person doing the most unwieldy work on deck.
>
>Fishing the end out usually is easier if you can work from all directions 
>thought the hole.
>
>Just personal preference.
>
>Mark
>
>------------------------------------------------------------------------
>Would you like to save big on your phone bill -- and keep on saving
>more each month? Join beMANY! Our huge buying group gives you Long Distance
>rates which fall monthly, plus an extra $60 in FREE calls!
>http://click.egroups.com/1/2567/8/_/476031/_/957667229/
>------------------------------------------------------------------------




------------------------------------------------------------------------
You have a voice mail message waiting for you at iHello.com:
http://click.egroups.com/1/3555/8/_/476031/_/957746937/
------------------------------------------------------------------------


 957746872.0