[alberg30] Rudder Removal

Joyce Sousa jsss at net1plus.com
Mon May 15 10:32:26 PDT 2000


Guy,
Since you have to get a good 2 feet of rudder post out of the hull in order to fully remove the rudder, it is necessary to remove the prop and shaft (unless you have enough room to pull it into the engine compartment a few inches).  it is a lot easier to remove if you can get the boat in some slings... ours was on jack stands and we had to dig an angled 3 foot hole under the keel... it wasn't fun!

Good luck,
Chris Sousa
#114
  ----- Original Message ----- 
  From: Guy Lalonde 
  To: alberg30 at egroups.com 
  Sent: Sunday, May 14, 2000 1:14 PM
  Subject: [alberg30] Rudder Removal


  To remove the rudder, do I need to remove the propeller (which BTW is a 3 blade) or both the propeller AND the drive shaft or (hopefully) neither ?


  Thanks in advance for any help.

  Guy
  #466

------------------------------------------------------------------------------



------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20000515/95bc0954/attachment-0008.htm>


More information about the Public-List mailing list