[alberg30] Stern Casting

[George Dinwiddie]

Guy,

After removing the two bolts, the stern casting *unscrews* from the 
shaft log.  It doesn't pull straight off.

 - George

> Guy Lalonde said:
> 
> I will try to re-thread the stern casting. Aside from the 2 screws holding
> the stern casting to the hull, is there anything else holding it in place
> that I may need to remove or disassemble ?

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
Failed tests, classes skipped, forgotten locker combinations. 
Remember the good 'ol days
http://click.egroups.com/1/4053/8/_/476031/_/959085687/
------------------------------------------------------------------------


 959085686.0